Novel waste printed circuit board recycling process with molten salt

Loading...
Thumbnail Image
Files
Sousa_Gallagher2.pdf(1.06 MB)
Published Version
Date
2015-02-21
Authors
Riedewald, Frank
Sousa-Gallagher, Maria J.
Journal Title
Journal ISSN
Volume Title
Publisher
Elsevier B.V.
Research Projects
Organizational Units
Journal Issue
Abstract
The objective of the method was to prove the concept of a novel waste PCBs recycling process which uses inert, stable molten salts as the direct heat transfer fluid and, simultaneously, uses this molten salt to separate the metal products in either liquid (solder, zinc, tin, lead, etc.) or solid (copper, gold, steel, palladium, etc.) form at the operating temperatures of 450–470 °C. The PCB recovery reactor is essentially a U-shaped reactor with the molten salt providing a continuous fluid, allowing molten salt access from different depths for metal recovery. A laboratory scale batch reactor was constructed using 316L as suitable construction material. For safety reasons, the inert, stable LiCl–KCl molten salts were used as direct heat transfer fluid. Recovered materials were washed with hot water to remove residual salt before metal recovery assessment. The impact of this work was to show metal separation using molten salts in one single unit, by using this novel reactor methodology. The reactor is a U-shaped reactor filled with a continuous liquid with a sloped bottom representing a novel reactor concept. This method uses large PCB pieces instead of shredded PCBs as the reactor volume is 2.2 L. The treated PCBs can be removed via leg B while the process is on-going.
Description
Keywords
Printed circuit boards recycling , Float-sink separation , Metal recovery , Molten salt reactor
Citation
Riedewald, F. and Sousa-Gallagher, M. J. (2015) 'Novel waste printed circuit board recycling process with molten salt', MethodsX, 2, pp. 100-106. doi:10.1016/j.mex.2015.02.010