Atomic layer deposition of photovoltaics

Show simple item record

dc.contributor.advisor Povey, Ian en
dc.contributor.advisor O'Brien, Shane en
dc.contributor.advisor Pemble, Martyn E. en
dc.contributor.author McCarthy, Melissa M.
dc.date.accessioned 2019-06-04T09:18:47Z
dc.date.available 2019-06-04T09:18:47Z
dc.date.issued 2019
dc.date.submitted 2019
dc.identifier.citation McCarthy, M. M. 2019. Atomic layer deposition of photovoltaics. PhD Thesis, University College Cork. en
dc.identifier.endpage 316 en
dc.identifier.uri http://hdl.handle.net/10468/8009
dc.description.abstract In recent years organic-inorganic halide perovskites have gained significant interest due to their high power conversion efficiencies (PCEs). These high efficiencies can be attributed to the perovskites’ tuneable optical bandgap and long carrier diffusion length, with their low fabrication cost facilitating accelerated research. The first reported PCE using an organic-inorganic halide perovskite was 3.8 %, achieved in 2009 in conjunction with a liquid electrolyte. Since then, the perovskite field has been extensively studied and efficiencies now reach over 24.2 %. Despite these advances, long term stability and scalability have remained major challenges. Atomic layer deposition (ALD) is a low processing temperature technique capable of providing unrivalled thin-film conformality with uniform sub-nanometre thickness on large scale areas. Its use in depositing thin charge selective contacts as well as passivation layers in upscaled perovskite devices could further the field toward viable commercialisation. The work carried out in this thesis is primarily concerned with the control and modification of electron transport layers (ETLs) deposited by ALD for use in mesoporous and planar perovskite solar cells (PSCs). ALD TiO2 was compared to TiO2 deposited by the alternative methods of spin-coating and RF sputtering and incorporated into mesoporous devices using both commercial and atmospheric pressure chemical vapour deposited (APCVD) FTO coated glass. The ability of ALD to produce conformal and pinhole free layers with high thickness uniformity at < 200◦C was demonstrated and the optimisation of ALD TiO2 led to the fabrication of 1 cm2 mesoporous PSCs with efficiencies of 16.45 %, matching the performance of cells incorporating RF sputtered TiO2 and exceeding that of cells containing spin coated TiO2. Following on from this, alternative growth chemistries and laminate doping of ALD TiO2 were explored for use in mesoporous PSCs. For planar perovskite devices, ALD TiO2 was problematic. Impurities and non-stoichiometry, previously improved by an anneal step for mesoporous devices, hampered performance. To counter this, rapid thermal annealing and in-situ interface engineering were investigated. Improvements were observed but the performance of TiO2 in the mesoporous structure was not matched in the planar configuration. Attention was then turned to SnO2, a material with a superior conduction band alignment with perovskites. In the planar n-i-p configuration 18.3 % PCE was achieved on 0.09 cm2 and 15.9 % PCE was obtained on 0.7 cm2 demonstrating considerable promise for commercial processes. Finally, the p-i-n configuration of planar cell architecture was considered, where the ETL is grown directly on to the perovskite by ALD. Initial studies indicate that ALD chemistry can be tuned to prevent damage to either the bulk perovskite or its interface. The work presented in this thesis has demonstrated ALD to be an ETL deposition technique of great potential for efficient upscaled perovskite devices particularly in the reverse p-i-n architecture. en
dc.format.mimetype application/pdf en
dc.language.iso en en
dc.publisher University College Cork en
dc.rights © 2019, Melissa M. McCarthy. en
dc.rights.uri http://creativecommons.org/licenses/by-nc-nd/3.0/ en
dc.subject Perovskite solar cell en
dc.subject Thin film deposition en
dc.subject Surface passivation en
dc.subject Perovskite en
dc.subject Metal oxide en
dc.subject Energy en
dc.subject Atomic layer deposition en
dc.title Atomic layer deposition of photovoltaics en
dc.type Doctoral thesis en
dc.type.qualificationlevel Doctoral en
dc.type.qualificationname PhD en
dc.internal.availability Full text available en
dc.check.info Not applicable en
dc.description.version Accepted Version
dc.contributor.funder H2020 Energy en
dc.description.status Not peer reviewed en
dc.internal.school Chemistry en
dc.check.type No Embargo Required
dc.check.reason Not applicable en
dc.check.opt-out Not applicable en
dc.thesis.opt-out false
dc.check.embargoformat Embargo not applicable (If you have not submitted an e-thesis or do not want to request an embargo) en
ucc.workflow.supervisor ian.povey@tyndall.ie
dc.internal.conferring Summer 2019 en
dc.internal.ricu Tyndall National Institute en
dc.relation.project info:eu-repo/grantAgreement/EC/H2020::RIA/653296/EU/Production technology to achieve low Cost and Highly Efficient phOtovoltaic Perovskite Solar cells/CHEOPS en


Files in this item

This item appears in the following Collection(s)

Show simple item record

© 2019, Melissa M. McCarthy. Except where otherwise noted, this item's license is described as © 2019, Melissa M. McCarthy.
This website uses cookies. By using this website, you consent to the use of cookies in accordance with the UCC Privacy and Cookies Statement. For more information about cookies and how you can disable them, visit our Privacy and Cookies statement