Exploring conductivity in ex-situ doped Si thin films as thickness approaches 5nm

Loading...
Thumbnail Image
Files
10295.pdf(2.21 MB)
Published version
Date
2019-06-14
Authors
MacHale, John
Meaney, Fintan
Kennedy, Fintan
Eaton, Luke
Mirabelli, Gioele
White, Mary
Thomas, Kevin
Pelucchi, Emanuele
Hjorth Petersen, Dirch
Lin, Rong
Journal Title
Journal ISSN
Volume Title
Publisher
AIP Publishing
Published Version
Research Projects
Organizational Units
Journal Issue
Abstract
Silicon (Si) has been scaled below 10 nm in multigate and silicon-on-insulator (SOI) device technologies, but clearly Si thickness cannot be reduced indefinitely, as we will run out of atoms eventually. As thickness approaches 5 nm, surfaces and interfaces will significantly impact the electrical behavior of Si, and surface physics cannot be discounted. Below that, bulk material properties will be altered considerably in the few-monolayer limit. One of the most basic defining properties of a semiconductor is its conductivity. To improve conductivity, while inducing a channel by appropriate biasing, it is necessary to define an accurate impurity doping strategy to reduce parasitic resistance. In this paper, we investigated the changing electrical conductivity of SOI films as a function of the Si thickness, in the range of 3–66 nm. SOI films were ex situ doped using three different approaches: liquid/vapor phase monolayer doping of phosphorus using allyldiphenylphosphine, gas-phase doping of arsenic using arsine (AsH3), and room-temperature beam-line ion implantation of phosphorus. The circular transfer length method and micro-four-point probe measurements were used to determine the resistivity of the Si films, mitigating the contribution from contact resistance. The resistivity of the Si films was observed to increase with decreasing Si film thickness below 20 nm, with a dramatic increase observed for a Si thickness at 4.5 nm. This may drastically impact the number of parallel conduction paths (i.e., nanowires) required in gate-all-around devices. Density functional theory modeling indicates that the surface of the Si film with a thickness of 4.5 nm is energetically more favorable for the dopant atom compared to the core of the film.
Description
Keywords
Silicon , Phosphorus , AL2O3 , Model , Doping , Semiconductors , Density functional theory , Thin films , Chemical compounds and components , Nanowires , Gas phase , Parasitic resistances , Ion implantation
Citation
MacHale, J., Meaney, F., Kennedy, N., Eaton, L., Mirabelli, G., White, M., Thomas, K., Pelucchi, E., Petersen, D. H., Lin, R., Petkov, N., Connolly, J., Hatem, C., Gity, F., Ansari, L., Long, B. and Duffy, R. (2019) 'Exploring conductivity in ex-situ doped Si thin films as thickness approaches 5 nm', Journal of Applied Physics, 125(22), 225709 (9 pp).
Copyright
© 2019 Author(s). Published under license by AIP Publishing.