Electrodeposited structurally stable V2O5 inverse opal networks as high performance thin film lithium batteries

No Thumbnail Available
5555.pdf(1.41 MB)
Accepted version
Armstrong, Eileen
McNulty, David
Geaney, Hugh
O'Dwyer, Colm
Journal Title
Journal ISSN
Volume Title
American Chemical Society (ACS)
Published Version
Research Projects
Organizational Units
Journal Issue
High performance thin film lithium batteries using structurally stable electrodeposited V2O5 inverse opal (IO) networks as cathodes provide high capacity and outstanding cycling capability and also were demonstrated on transparent conducting oxide current collectors. The superior electrochemical performance of the inverse opal structures was evaluated through galvanostatic and potentiodynamic cycling, and the IO thin film battery offers increased capacity retention compared to micron-scale bulk particles from improved mechanical stability and electrical contact to stainless steel or transparent conducting current collectors from bottom-up electrodeposition growth. Li+ is inserted into planar and IO structures at different potentials, and correlated to a preferential exposure of insertion sites of the IO network to the electrolyte. Additionally, potentiodynamic testing quantified the portion of the capacity stored as surface bound capacitive charge. Raman scattering and XRD characterization showed how the IO allows swelling into the pore volume rather than away from the current collector. V2O5 IO coin cells offer high initial capacities, but capacity fading can occur with limited electrolyte. Finally, we demonstrate that a V2O5 IO thin film battery prepared on a transparent conducting current collector with excess electrolyte exhibits high capacities (∼200 mAh g–1) and outstanding capacity retention and rate capability.
Cathode , Energy storage , Inverse opal , Lithium batteries , Vanadium oxide
Armstrong, E., McNulty, D., Geaney, H. and O’Dwyer, C. (2015) 'Electrodeposited Structurally Stable V2O5 Inverse Opal Networks as High Performance Thin Film Lithium Batteries', ACS Applied Materials & Interfaces, 7(48), pp. 27006-27015. doi: 10.1021/acsami.5b0951
© 2018 American Chemical Society. This document is the Accepted Manuscript version of a Published Work that appeared in final form in ACS Applied Materials and Interfaces, copyright © American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see https://pubs.acs.org/doi/abs/10.1021/acsami.5b09511