New design techniques and architectures for highly-reconfigurable and continuously-tunable RF filters using acoustic-wave and planar-microwave resonators

Simple item page
dc.contributor.advisorPsychogiou, Dimitra
dc.contributor.advisorMcCarthy, Kevin G.
dc.contributor.authorNasser, Mohammeden
dc.contributor.funderResearch Ireland
dc.contributor.funderIndiana Microelectronics
dc.date.accessioned2026-05-19T10:59:59Z
dc.date.available2026-05-19T10:59:59Z
dc.date.issued2025-12-31
dc.date.submitted2025-12-31
dc.description.abstractThe rapid growth of wireless networks, for example, the fifth and sixth generation (5G/6G) of wireless is increasingly calling for highly-versatile radio frequency (RF) front-ends capable of sensing the electromagnetic spectrum and dynamically adapting to changing spectral conditions and user needs. To facilitate their deployment, ultra compact and highly-reconfigurable RF filters need to be incorporated in their RF transceivers to facilitate detection of low-power RF signals amid high-power, dynamically-allocated interferers and adaptive band selection. Acoustic-wave-resonator (AWR)-based filtering technologies have been the main filtering technology for mobile RF transceivers due to their ultracompact size and their inherent high unloaded quality factor (Q) ≈ 2,000-10,000. However, they are limited by static transfer functions (TFs) and very narrow fractional bandwidths (FBWs) <0.5% that are approximately equal to 0.4–0.8kt2 (kt2 is the electromechanical coupling coefficient). Microwave planar-based RF filters such as those based on microstrip, stripline and coplanar waveguide (CPW) resonator technologies exhibit wider FBWs (2-10%) and can tune their TFs in terms of frequency, bandwidth (BW), and number of bands. However, they suffer from low Q (≈50-100) and despite being tunable their tuning range is limited to 1.5:1 and to frequencies up to L-band. This thesis is centered around new design techniques, tuning concepts and integration approaches for continuously-tunable RF filters using AWRs and highly-miniaturized planar microwave resonators. Specifically, it introduces new classes of: i) quasi-elliptic acoustic-wave lumped-element resonator (AWLR)-based RF filters with continuously tunable frequency and BW, and multi-configurable tunable modes of operation (i.e., adapted between multiple bandpass, bandstop, all-pass and all-stop operational modes) while having enhanced FBWs (i.e.,>0.4–0.8kt2) as needed for effective spectrum management in multi-standard communications; ii) reflective and quasi-reflectionless multi-band AWR-based bandpass filters (BPFs) to facilitate multi-band operability and minimize RF signal reflections, improving the signal-to-noise ratio (SNR), and iii) widely-tunable tune-all planar-based BPFs with ultra-wide centre frequency (fcen) and BW tunability of almost two octaves within the most crowded part of the Frequency Range 1 (FR1) spectrum using a new-type of a switchless manifold two-filter approach.en
dc.description.statusNot peer revieweden
dc.description.versionAccepted Versionen
dc.format.mimetypeapplication/pdfen
dc.identifier.citationNasser, M. R. A. 2025. New design techniques and architectures for highly-reconfigurable and continuously-tunable RF filters using acoustic-wave and planar-microwave resonators. PhD Thesis, University College Cork.
dc.identifier.endpage158
dc.identifier.urihttps://hdl.handle.net/10468/18780
dc.language.isoenen
dc.publisherUniversity College Corken
dc.relation.projectinfo:eu-repo/grantAgreement/SFI/Research Professorship Programme/20/RP/8334/IE/Highly-Versatile RF Front-End Antenna Interfaces for Next Generation Communications/en
dc.rights© 2025, Mohammed Nasser.
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/4.0/
dc.subjectAcoustic wave filter
dc.subjectBand-pass filter (BPF)
dc.subjectKt2-enhancement
dc.subjectBandpass filter (BPF)
dc.subjectBand-pass filter (BPF)
dc.subjectReconfigurable filter
dc.subjectBandstop filter (BSF)
dc.subjectAcoustic wave resonator (AWR)
dc.subjectSurface acoustic wave (SAW) resonator
dc.subjectTunable filter
dc.subjectMultilayer
dc.subjectDual-band
dc.subjectHigh-frequency filter
dc.subjectHigh quality factor (Q)
dc.subjectOctave tuning
dc.titleNew design techniques and architectures for highly-reconfigurable and continuously-tunable RF filters using acoustic-wave and planar-microwave resonators
dc.typeDoctoral thesisen
dc.type.qualificationlevelDoctoralen
dc.type.qualificationnamePhD - Doctor of Philosophyen
Files
Original bundle
Now showing 1 - 2 of 2
Thumbnail Image
Name:
011126_MN_PhD_Thesis.docx
Size:
47.18 MB
Format:
Microsoft Word XML
Description:
Full Text E-thesis (Word)
Thumbnail Image
Name:
NasserM_PhD2025_Thesis.pdf
Size:
36.38 MB
Format:
Adobe Portable Document Format
Description:
Full Text E-thesis
Download
License bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
license.txt
Size:
5.2 KB
Format:
Item-specific license agreed upon to submission
Description:
Download
Collections
Research Theses
College of Science, Engineering and Food Science - Doctoral Theses
Electrical and Electronic Engineering - Doctoral Theses
Tyndall National Institute - Doctoral Theses