Simulations of 3D nanoscale architectures and electrolyte characteristics for Li-ion microbatteries
dc.check.date | 2021-03-07 | |
dc.check.info | Access to this article is restricted until 12 months after publication by request of the publisher. | en |
dc.contributor.author | Clancy, Tomás M. | |
dc.contributor.author | Rohan, James F. | |
dc.contributor.funder | Science Foundation Ireland | en |
dc.contributor.funder | European Regional Development Fund | en |
dc.date.accessioned | 2019-03-11T10:27:40Z | |
dc.date.available | 2019-03-11T10:27:40Z | |
dc.date.issued | 2019-03-07 | |
dc.date.updated | 2019-03-11T10:19:44Z | |
dc.description.abstract | Finite element simulations are presented, showing material utilisation and electrochemical cell behaviour of a rechargeable Li-ion microbattery in planar thin-film, 3D and 3D core core-shell nanoarchitectures in which the active material is 250 nm thick as a shell on a 250 nm diameter core support. The materials simulated are non-porous additive-free LiCoO2, lithium metal and solid-state, polymer, polymer-gel and liquid electrolytes. The concentration profile of the LiCoO2 during discharge and areal energy versus areal power in a Ragone plot for each of the different architectures are compared. It is shown that the planar thin-film architecture gave better cell performance when used with the solid-state electrolyte with all three architectures showing material utilisation of the cathode at the closest point to the anode. The 3D and 3D core-shell nanoarchitectures show better battery performance for the polymer electrolyte then the planar thin film, with the 3D nanoarchitecture being the best. The 3D core-shell architecture shows a significant improvement in performance by comparison with the thin-film and 3D nanoarchitectures when a polymer-gel or a liquid electrolyte are used. The 3D nanoarchitecture shows a slight decline in performance when going from a polymer-gel electrolyte to a liquid electrolyte with faster Li-ion transport. The 3D core-shell nanoarchitecture shows improved cell performance with faster Li-ion transport. The adoption of 3D nanoarchitectures with suitable electrolytes can have a significant improvement in battery areal energy and power performance. | en |
dc.description.status | Peer reviewed | en |
dc.description.version | Accepted Version | en |
dc.format.mimetype | application/pdf | en |
dc.identifier.citation | Clancy, T. M. and Rohan, J. F. (2019) 'Simulations of 3D nanoscale architectures and electrolyte characteristics for Li-ion microbatteries', Journal of Energy Storage, 23, pp. 1-8. doi: 10.1016/j.est.2019.02.002 | en |
dc.identifier.doi | 10.1016/j.est.2019.02.002 | |
dc.identifier.endpage | 8 | en |
dc.identifier.issn | 2352-152X | |
dc.identifier.journaltitle | Journal Of Energy Storage | en |
dc.identifier.startpage | 1 | en |
dc.identifier.uri | https://hdl.handle.net/10468/7587 | |
dc.identifier.volume | 23 | en |
dc.language.iso | en | en |
dc.publisher | Elsevier | en |
dc.relation.project | info:eu-repo/grantAgreement/SFI/SFI Investigator Programme/12/IP/1722/IE/Nanomaterials design and fabrication for Energy Storage/ | en |
dc.relation.project | info:eu-repo/grantAgreement/SFI/SFI Research Centres/13/RC/2077/IE/CONNECT: The Centre for Future Networks & Communications/ | en |
dc.relation.uri | http://www.sciencedirect.com/science/article/pii/S2352152X18305371 | |
dc.rights | © 2019 Published by Elsevier Ltd. All rights reserved. This manuscript version is made available under the CC-BY-NC-ND 4.0 license | en |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/4.0/ | en |
dc.subject | Finite element simulations | en |
dc.subject | Planar thin-film microbattery | en |
dc.subject | 3D nanoarchitectures | en |
dc.subject | Ionic conductivity | en |
dc.title | Simulations of 3D nanoscale architectures and electrolyte characteristics for Li-ion microbatteries | en |
dc.type | Article (peer-reviewed) | en |
Files
Original bundle
1 - 1 of 1
Loading...
- Name:
- J_Energy_Storage_Rohan_simulations.pdf
- Size:
- 1.33 MB
- Format:
- Adobe Portable Document Format
- Description:
- Accepted version
License bundle
1 - 1 of 1
Loading...
- Name:
- license.txt
- Size:
- 2.71 KB
- Format:
- Item-specific license agreed upon to submission
- Description: