A randomised controlled study on the effects of different surface treatments and adhesive self-etch functional monomers on the immediate repair bond strength and integrity of the repaired resin composite interface
Loading...
Files
Date
2019
Authors
Martos, Renata
Hegedüs, Viktória
Szalóki, Melinda
Blum, Igor R.
Lynch, Christopher D.
Hegedüs, Csaba
Journal Title
Journal ISSN
Volume Title
Publisher
Elsevier Ltd
Published Version
Abstract
Objectives: To evaluate the effects of different surface conditioning methods on the immediate repair bond strength and integrity of the repaired composite interface. Methods: One hundred and five resin composite blocks made of a nanohybrid resin composite were randomly assigned to one of the following surface conditioning groups (n = 15/group): Group 1: Gluma Self Etch™ adhesive system, Group 2: Tokuyama Bond Force II™ adhesive system, Group 3: non-roughened and non-conditioned surfaces, Group 4: sandblasting and Gluma Self Etch™, Group 5: sandblasting and Tokuyama Bond Force II™, Group 6: sandblasting only. A positive control group was also used. Resin composite identical to the substrate was applied and the repaired specimens were subjected to shear bond strength (SBS) testing. Representative samples from all groups were subjected to scanning electron microscopy and surface profilometry to determine their mode of failure. The data were analysed statistically using Analysis of Variance (ANOVA) and two independent sample t-test (α = 0.05). Results: The mean SBS of all test groups ranged between 1.92 and 5.40 MPa and varied with the degree of composite surface roughness and the type of adhesive system employed. Significantly highest SBS values (5.40 ± 0.36 MPa) were obtained in Group 5 (p = 0.017) which were comparable to the coherent strength of the resin composite in the positive control group (p > 0.05). Conclusions: Under the tested conditions, significantly greater SBS of repaired resin composite was achieved when the substrate surface was conditioned by sandblasting followed by the application of the Tokuyama Bond Force II™ adhesive system. Clinical significance: Effecting a repair of a nanohybrid composite restoration with sandblasting and the application of TBF II would seem to enhance the interfacial bond strength and integrity of the repaired resin composite interface. Clinical trials are necessary to determine the usefulness of this technique. © 2019 Elsevier Ltd
Description
Keywords
Minimally invasive dentistry , Nanohybrid composite repair , Shear bond strength
Citation
Martos, R., Hegedüs, V., Szalóki, M., Blum, I. R., Lynch, C. D. and Hegedüs, C. (2019) 'A randomised controlled study on the effects of different surface treatments and adhesive self-etch functional monomers on the immediate repair bond strength and integrity of the repaired resin composite interface', Journal of Dentistry, 85, pp.57-63. https://doi.org/10.1016/j.jdent.2019.04.012