A conformal, dynamic pattern-reconfigurable antenna using conductive textile-polymer composite

Loading...
Thumbnail Image
Files
15725_Conformal.pdf(2.23 MB)
Accepted Version
Date
2021-04-05
Authors
Mohamadzade, Bahare
Simorangkir, Roy B. V. B.
Hashmi, Raheel M.
Gharaei, Reza
Lalbakhsh, Ali
Shrestha, Sujan
Zhadobov, Maxim
Sauleau, Ronan
Journal Title
Journal ISSN
Volume Title
Publisher
Institute of Electrical and Electronics Engineers (IEEE)
Research Projects
Organizational Units
Journal Issue
Abstract
A conformal antenna with electronically tuning capability of its radiation pattern between broadside and monopole-like patterns is proposed. The antenna is based on a proximity-fed circular patch, loaded with a ring patch and four rectangular slots. The design is planar without any use of rigid shorting posts or complex feeding network. The reconfigurability is achieved by activating and deactivating the slots using PIN diodes, to switch between TM02 (monopole-like mode) and perturbed TM02 distributions (broadside mode) of the antenna. For conformability, the antenna is fabricated using highly flexible PDMS-conductive fabric composite. All the antenna parts, including the RF switches, wires, and DC biasing circuit are fully encapsulated by PDMS to provide resilience against deformation and harsh environment. Investigations on the RF performance and mechanical stability of the antenna were conducted. Under various bendings, it was demonstrated that all the antenna components, including those for electronic switching, remained intact and in working order even under radius bending of 30 mm, thus maintaining good pattern reconfigurability and overall performance. When bent, the measured results at 5.2 GHz show a stable radiation performance relative to those of the flat case (i.e., maximum gain of 2.9 dBi and efficiency of 64% in broadside mode, corresponding to 1.75 dBi and 52% in monopole-like mode). To the best of our knowledge, all these features have never been demonstrated in previously published pattern reconfigurable antennas.
Description
Keywords
Conductive textile , Conformal antenna , Conformal antenna , Pattern reconfigurable antenna
Citation
Mohamadzade, B., Simorangkir, R. B. V. B., Hashmi, R. M., Gharaei, R., Lalbakhsh, A., Shrestha, S., Zhadobov, M. and Sauleau, R. (2021) 'A conformal, dynamic pattern-reconfigurable antenna using conductive textile-polymer composite', IEEE Transactions on Antennas and Propagation, 69(10), pp. 6175-6184. doi: 10.1109/TAP.2021.3069422
Link to publisher’s version
Copyright
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.