A novel RCS based CRFID tag design
Loading...
Files
Accepted Version
Date
2022-05-11
Authors
Rather, Nadeem
Buckley, John
O'Flynn, Brendan
Pigeon, Melusine
Journal Title
Journal ISSN
Volume Title
Publisher
Institute of Electrical and Electronics Engineers (IEEE)
Published Version
Abstract
In this paper, a Chipless RFID tag design based on Radar Cross Section (RCS) operating principle is proposed. The tag is implemented using a series of circular ring resonators to enable tag identification. The resonators are simulated and then fabricated on an FR4 substrate. A calibration technique using a ring resonator to improve the detection of 8-bit data is proposed and demonstrated. The fabricated tag is measured at a distance of 160 mm using the monostatic RCS method. The measurement results verify the simulation results and show accurate detection of the encoded information.
Description
Keywords
Antennas , Chipless RFID , Circular ring resonators , Measurements , Radar cross section
Citation
Rather, N., Buckley, J., O'Flynn, B. and Pigeon, M. (2022) 'A novel RCS based CRFID tag design' 2022 16th European Conference on Antennas and Propagation (EuCAP), Madrid, Spain, 27 March-1 April, pp. 1-5. doi: 10.23919/EuCAP53622.2022.9769588.
Link to publisher’s version
Copyright
© 2022, IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.