Citation:Lewis, L., Casey, D., Rohan, J. F. and Maaskant, P. P. (2007) ‘Metal contacts to p-type GaN by electroless deposition', Proceedings of SPIE, 6797, Manufacturing LEDs for Lighting and Displays; Berlin, Germany, 10-11 September, 67970J, doi: 10.1117/12.758947
Initial results are presented on the electroless deposition of metal contacts to p-type gallium nitride (GaN). Deposition procedures were developed for the deposition of both nickel and tungsten-cobalt (W-Co) contacts onto p-type GaN. Attempts to deposit platinum on p-type GaN failed, despite the fact that electroless platinum deposition was successfully achieved on other substrate types. Nickel contacts were overlaid with gold and annealed in oxygen ambient to form ohmic contacts with specific contact resistivity values down to 2x10-2 &OHgr;cm2. Measurements at elevated temperatures up to 140 degrees C showed that the specific contact resistivity was almost independent of temperature. The tungsten-cobalt contacts showed rectifying behaviour even after annealing at 650 degrees C. This makes this contact type a possible candidate for Schottky contacts in high temperature applications.
This website uses cookies. By using this website, you consent to the use of cookies in accordance with the UCC Privacy and Cookies Statement. For more information about cookies and how you can disable them, visit our Privacy and Cookies statement