A normalization-based approach to the mobility analysis of spatial compliant multi-beam modules
Loading...
Files
Accepted Version
Date
2013-01
Authors
Hao, Guangbo
Kong, Xianwen
Journal Title
Journal ISSN
Volume Title
Publisher
Elsevier
Published Version
Abstract
This paper presents a normalization-based approach to the mobility analysis of spatial compliant multi-beam modules to address the dimensional-inhomogeneity issue of motion/load. Firstly, two spatial non-tilted and tilted multi-beam modules, composed of uniform beams with symmetrical cross sections and same length, are proposed. Using a normalization technique, the compliance matrices of these spatial multi-beam modules are derived, from which the DOF (degrees-of-freedom) of the compliant modules can be obtained by direct observation and/or screw representation. The results are compared with those obtained without normalization. It is shown that the DOF of these compliant modules can be identified more easily using the proposed approach than the approach without normalization. Then, two spatial double non-tilted and tilted three-beam modules are proposed and analyzed for potential applications such as acting as building blocks of new compliant manipulators. The normalization-based approach can also be used for the mobility analysis of spatial compliant multi-sheet modules such as the parallelogram module and the four-sheet rotational module and the error analysis of spatial multi-beam modules with beams of compatible length.
Description
Keywords
Compliant mechanisms , Spacial modules , Mobility analysis , Normalisation
Citation
Hao, G. & Kong, X. (2013). 'A normalization-based approach to the mobility analysis of spatial compliant multi-beam modules.' Mechanism and Machine Theory, 59, 1-19. doi: 10.1016/j.mechmachtheory.2012.08.013
Link to publisher’s version
Copyright
© 2012, Elsevier. NOTICE: this is the author’s version of a work that was accepted for publication in Mechanism and Machine Theory. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Mechanism and Machine Theory, [59, January 2013] http://dx.doi.org/10.1016/j.mechmachtheory.2012.08.013