Comparing cycling and rate response of SnO2 macroporous anodes in lithium-ion and sodium-ion batteries

dc.contributor.authorGrant, Alex
dc.contributor.authorCarroll, Aoife
dc.contributor.authorZhang, Yan
dc.contributor.authorGulzar, Umair
dc.contributor.authorAhad, Syed Abdul
dc.contributor.authorGeaney, Hugh
dc.contributor.authorO'Dwyer, Colm
dc.contributor.funderScience Foundation Ireland
dc.contributor.funderIrish Research Council
dc.contributor.funderHorizon 2020
dc.date.accessioned2024-04-30T15:32:48Z
dc.date.available2024-04-27T18:09:16Zen
dc.date.available2024-04-30T15:32:48Z
dc.date.issued2023-12-07
dc.date.updated2024-04-27T17:09:26Zen
dc.description.abstractTin oxide (SnO2) is a useful anode material due to its high capacity (1493 mAh g−1 and 1378 mAh g−1 vs Li/Li+ and vs Na/Na+, respectively) and natural abundance (tin is one of the thirty most abundant elements on Earth). Unfortunately, only moderate electrical conductivity and significant volume expansion of up to 300% for Li-ion, and as much as 520% for Na-ion can occur. Here, we use an ordered macroporous interconnected inverse opal (IO) architectures to enhance rate capability, structural integrity, and gravimetric capacity, without conductive additives and binders. Excellent capacity retention is shown during cycling vs Na/Na+ relative to Li/Li+. Cyclic voltammetry (CV) analysis, galvanostatic cycling, and differential capacity analysis extracted from rate performance testing evidence the irreversibility of the oxidation of metallic Sn to SnO2 during charge. This behavior allows for a very stable electrode during cycling at various rates. A stable voltage profile and rate performance is demonstrated for both systems. In a Na-ion half cell, the SnO2 retained >76% capacity after 100 cycles, and a similar retention after rate testing.
dc.description.sponsorshipIrish Research Council (Advanced Laureate Award IRCLA/19/118; Government of Ireland Postdoctoral Fellowship GOIPD/2021/438)
dc.description.statusPeer revieweden
dc.description.versionPublished Version
dc.format.mimetypeapplication/pdfen
dc.identifier.articleid120505
dc.identifier.citationGrant, A., Carroll, A., Zhang, Y., Gulzar, U., Ahad, S. A., Geaney, H. and O’Dwyer, C. (2023) 'Comparing cycling and rate response of SnO2 macroporous anodes in lithium-ion and sodium-ion batteries', Journal of the Electrochemical Society, 170(12), 120505 (15pp). https://doi.org/10.1149/1945-7111/ad0ff5
dc.identifier.doihttps://doi.org/10.1149/1945-7111/ad0ff5
dc.identifier.eissn1945-7111
dc.identifier.endpage15
dc.identifier.issn0013-4651
dc.identifier.issued12
dc.identifier.journaltitleJournal of the Electrochemical Society
dc.identifier.startpage1
dc.identifier.urihttps://hdl.handle.net/10468/15829
dc.identifier.volume170
dc.language.isoenen
dc.publisherIOP Publishing
dc.relation.projectinfo:eu-repo/grantAgreement/SFI/SFI Starting Investigator Research Grant/18/SIRG/5484/IE/Silicon Anodes through Nanostructural Development (SAND)/
dc.relation.projectinfo:eu-repo/grantAgreement/EC/H2020::RIA/825114/EU/Smart Autonomous Multi Modal Sensors for Vital Signs Monitoring/SmartVista
dc.rights© 2023, the Authors. Published on behalf of The Electrochemical Society by IOP Publishing Limited. This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 License (https://creativecommons.org/licenses/ by/4.0/), which permits unrestricted reuse of the work in any medium, provided the original work is properly cited.
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/
dc.subjectCycling
dc.subjectRate response
dc.subjectSnO2 macroporous anodes
dc.subjectLithium-ion
dc.subjectSodium-ion
dc.subjectBatteries
dc.titleComparing cycling and rate response of SnO2 macroporous anodes in lithium-ion and sodium-ion batteries
dc.typeArticle (peer-reviewed)
Files
Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
Grant_2023_J._Electrochem._Soc._170_120505(1).pdf
Size:
6.16 MB
Format:
Adobe Portable Document Format
Description:
Published Version