Two-dimensional semiconductors for future electronics

dc.availability.bitstreamopenaccess
dc.contributor.advisorDuffy, Rayen
dc.contributor.advisorHurley, Paul K.en
dc.contributor.advisorMonaghan, Scotten
dc.contributor.authorMirabelli, Gioele
dc.contributor.funderIrish Research Councilen
dc.date.accessioned2020-06-19T10:10:36Z
dc.date.available2020-06-19T10:10:36Z
dc.date.issued2020
dc.date.submitted2020
dc.description.abstractThe aggressive scaling imposed by CMOS technology has put very stringent requirements on the dimensions of Silicon transistors. According to the semiconductor roadmaps (ITRS, IRDS, Nereid), the dimensions of the device might have reached its limits in terms of gate length. Although new device architectures are being studied to keep the pace up with Moore-law, new material systems are still relevant to further improve the performance of integrated circuits. On this regard, 2D-semiconductors, as transition metal dichalcogenides (TMDs), are being considered as potential replacement for Silicon. Because of their intrinsic thin nature, they can guarantee a better channel control at similar channel length, without suffering from high mobility degradation as other 3D-semiconductors. In this dissertation, the limits and potentials of 2D-semiconductors are investigated by material analysis, electrical characterization and TCAD modeling. First, the air sensitivity of few TMDs is considered. An initial AFM study show high reactivity in HfSe2, with blisters growing up to 60 nm after one day from ambient exposure. These results are later confirmed by other techniques, showing a high detrimental effect on the semiconductor surface. The surface treatment or protection of these materials needs to be carefully studied for their use in the semiconductor industry. A second limitation of 2D-electron devices is their low mobility compared with theoretical studies. Material and electrical characterizations of 3-layers MoS2 transistors show a high impurity concentration, which drastically limits the field-effect mobility and so device performance. Mobility could be improved carefully selecting a proper dielectric environment, which plays an important role in the current transport in thin semiconductors. However, the major limitation of 2D-based electronics is related to a poor metal-TMD interface, often characterized by high Schottky barriers and Fermi-level pinning. Taking as example modern semiconductor technologies, highly doped MoS2 devices are carefully studied. The contact resistance extracted is lower with respect of undoped or untreated samples, and close to the requirements imposed by the semiconductor roadmaps. Another solution might rely on the annealing of the metal-TMD interface in order to create a 3D-alloy, which might be optimal in terms of contact resistance. The final part is related to the development of a TCAD model for 2D-semiconductors. At first, the model parameters were carefully tuned against theoretical and experimental results. Then, a TCAD software was used for a deeper understanding of experimental devices, regarding the metal-TMD and oxide-TMD interface. Later, the same model was improved considering a layered-structure, taking into consideration the semiconductive layers as well as the Van-der-Waals gaps in between them.en
dc.description.statusNot peer revieweden
dc.description.versionAccepted Versionen
dc.format.mimetypeapplication/pdfen
dc.identifier.citationMirabelli, G. 2020. Two-dimensional semiconductors for future electronics. PhD Thesis, University College Cork.en
dc.identifier.endpage170en
dc.identifier.urihttps://hdl.handle.net/10468/10151
dc.language.isoenen
dc.publisherUniversity College Corken
dc.relation.projectIrish Research Council (Postgraduate Scholarship EPSPG/2015/69)en
dc.rights© 2020, Gioele Mirabelli.en
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/4.0/en
dc.subjectTCADen
dc.subjectSemiconductoren
dc.subjectField-effect-transistoren
dc.subject2D-materialsen
dc.titleTwo-dimensional semiconductors for future electronicsen
dc.typeDoctoral thesisen
dc.type.qualificationlevelDoctoralen
dc.type.qualificationnamePhD - Doctor of Philosophyen
Files
Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
E-Thesis Gioele Mirabelli.pdf
Size:
7 MB
Format:
Adobe Portable Document Format
Description:
Full Text E-thesis
License bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
5.2 KB
Format:
Item-specific license agreed upon to submission
Description: