Development of germanium/silicon integration for near infrared detection

Simple item page
dc.check.embargoformatNot applicableen
dc.check.infoNo embargo requireden
dc.check.opt-outNot applicableen
dc.check.reasonNo embargo requireden
dc.check.typeNo Embargo Required
dc.contributor.advisorCorbett, Brianen
dc.contributor.advisorMorrison, Alan P.en
dc.contributor.authorGity, Farzan
dc.contributor.funderScience Foundation Irelanden
dc.date.accessioned2013-10-14T09:22:35Z
dc.date.available2013-10-14T09:22:35Z
dc.date.issued2013
dc.date.submitted2013
dc.description.abstractSilicon (Si) is the base material for electronic technologies and is emerging as a very attractive platform for photonic integrated circuits (PICs). PICs allow optical systems to be made more compact with higher performance than discrete optical components. Applications for PICs are in the area of fibre-optic communication, biomedical devices, photovoltaics and imaging. Germanium (Ge), due to its suitable bandgap for telecommunications and its compatibility with Si technology is preferred over III-V compounds as an integrated on-chip detector at near infrared wavelengths. There are two main approaches for Ge/Si integration: through epitaxial growth and through direct wafer bonding. The lattice mismatch of ~4.2% between Ge and Si is the main problem of the former technique which leads to a high density of dislocations while the bond strength and conductivity of the interface are the main challenges of the latter. Both result in trap states which are expected to play a critical role. Understanding the physics of the interface is a key contribution of this thesis. This thesis investigates Ge/Si diodes using these two methods. The effects of interface traps on the static and dynamic performance of Ge/Si avalanche photodetectors have been modelled for the first time. The thesis outlines the original process development and characterization of mesa diodes which were fabricated by transferring a ~700 nm thick layer of p-type Ge onto n-type Si using direct wafer bonding and layer exfoliation. The effects of low temperature annealing on the device performance and on the conductivity of the interface have been investigated. It is shown that the diode ideality factor and the series resistance of the device are reduced after annealing. The carrier transport mechanism is shown to be dominated by generation–recombination before annealing and by direct tunnelling in forward bias and band-to-band tunnelling in reverse bias after annealing. The thesis presents a novel technique to realise photodetectors where one of the substrates is thinned by chemical mechanical polishing (CMP) after bonding the Si-Ge wafers. Based on this technique, Ge/Si detectors with remarkably high responsivities, in excess of 3.5 A/W at 1.55 μm at −2 V, under surface normal illumination have been measured. By performing electrical and optical measurements at various temperatures, the carrier transport through the hetero-interface is analysed by monitoring the Ge band bending from which a detailed band structure of the Ge/Si interface is proposed for the first time. The above unity responsivity of the detectors was explained by light induced potential barrier lowering at the interface. To our knowledge this is the first report of light-gated responsivity for vertically illuminated Ge/Si photodiodes. The wafer bonding approach followed by layer exfoliation or by CMP is a low temperature wafer scale process. In principle, the technique could be extended to other materials such as Ge on GaAs, or Ge on SOI. The unique results reported here are compatible with surface normal illumination and are capable of being integrated with CMOS electronics and readout units in the form of 2D arrays of detectors. One potential future application is a low-cost Si process-compatible near infrared camera.en
dc.description.sponsorshipScience Foundation Ireland (SFI Grant 07/SRC/I1173: Photonics Integration from Atoms to Systems (PIFAS))en
dc.description.statusNot peer revieweden
dc.description.versionAccepted Version
dc.format.mimetypeapplication/pdfen
dc.identifier.citationGity, F. 2013. Development of germanium/silicon integration for near infrared detection. PhD Thesis, University College Cork.en
dc.identifier.endpage167
dc.identifier.urihttps://hdl.handle.net/10468/1250
dc.language.isoenen
dc.publisherUniversity College Corken
dc.rights© 2013. Farzan Gityen
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/en
dc.subjectGermanium silicon integrationen
dc.subjectSemiconductor device – design, simulation and modellingen
dc.subjectNear infrared photodetectoren
dc.subjectAvalanche photodiode (APD)en
dc.subjectWafer bonding and epitaxyen
dc.subject.lcshIntegrated circuitsen
dc.subject.lcshGermanium diodesen
dc.subject.lcshSilicon diodesen
dc.subject.lcshSemiconductorsen
dc.subject.lcshDetectors--Design and constructionen
dc.thesis.opt-outfalse
dc.titleDevelopment of germanium/silicon integration for near infrared detectionen
dc.typeDoctoral thesisen
dc.type.qualificationlevelDoctoralen
dc.type.qualificationnamePHD (Engineering)en
ucc.workflow.supervisorbrian.corbett@tyndall.ie
Files
Original bundle
Now showing 1 - 2 of 2
Thumbnail Image
Name:
Abstract.pdf
Size:
68.75 KB
Format:
Adobe Portable Document Format
Description:
Abstract
Thumbnail Image
Name:
GityF_PhD2013.pdf
Size:
8.81 MB
Format:
Adobe Portable Document Format
Description:
Full Text E-thesis
Download
License bundle
Now showing 1 - 2 of 2
Thumbnail Image
Name:
license.txt
Size:
5.62 KB
Format:
Item-specific license agreed upon to submission
Description:
Download
Thumbnail Image
Name:
Licence.pdf
Size:
205.24 KB
Format:
Adobe Portable Document Format
Description:
License
Collections
Doctoral Theses
College of Science, Engineering and Food Science - Doctoral Theses
Electrical and Electronic Engineering - Doctoral Theses
Tyndall National Institute - Doctoral Theses