Pedestrian-to-vehicle communications in an urban environment: channel measurements and modeling

dc.contributor.authorDoone, M. G.
dc.contributor.authorCotton, S. L.
dc.contributor.authorMatolak, D. W.
dc.contributor.authorOestges, C.
dc.contributor.authorHeaney, S. F.
dc.contributor.authorScanlon, William G.
dc.contributor.funderEngineering and Physical Sciences Research Councilen
dc.date.accessioned2019-05-13T11:04:43Z
dc.date.available2019-05-13T11:04:43Z
dc.date.issued2019-03
dc.description.abstractAs wireless connectivity becomes increasingly ubiquitous, a greater emphasis will be placed upon the seamless integration of dissimilar networking technologies. One such example of this will occur in urban environments, where wearable devices and vehicular networks will operate in close proximity to one another. Clearly, a natural extension to both types of network is their interconnectivity through vehicle-to-pedestrian (V2P) or equivalently pedestrian-to-vehicle (P2V) communications as part of a much greater vehicle-to-X (V2X)-based intelligent transportation system. To this end, we empirically investigate the P2V communications channel at 5.8 GHz for the case of a moving vehicle when a person positioned by the edge of a road was either stationary or walking parallel to the side of the highway. The measurements considered a chest-mounted transmitter and four receiver locations on the vehicle covering the front wing mirrors and two positions on the roof, which simultaneously recorded the received signal power. To characterize the propagation mechanisms which are responsible for shaping the received signal in the P2V channel, we decomposed it into its path loss (PL), large-scale, and small-scale fading components. We first show that although there was evidence of interference caused by multiple rays interacting with one another, the popular two-ray ground-reflection PL model was unable to adequately describe the compounded effects of the vehicle and pedestrian’s body on the signal attenuation in the majority of the considered scenarios. Instead, we found that the overall PL was well characterized using a dual-slope log-distance model, with lognormal large-scale fading. Due to the often severe small-scale fading that was observed in the P2V channel, we have been able to utilize the κ-μ extreme distribution with considerable successen
dc.description.statusPeer revieweden
dc.description.versionPublished Versionen
dc.format.mimetypeapplication/pdfen
dc.identifier.citationDoone, M.G., Cotton, S.L., Matolak, D.W., Oestges, C., Heaney, S.F. and Scanlon, W.G., 2019. Pedestrian-to-vehicle communications in an urban environment: Channel measurements and modeling. IEEE Transactions on Antennas and Propagation, 67(3), (14pp). DOI: 10.1109/TAP.2018.2885461en
dc.identifier.doi10.1109/TAP.2018.2885461en
dc.identifier.endpage1803en
dc.identifier.issn0018-926X
dc.identifier.issued3en
dc.identifier.journaltitleIEEE Transactions on Antennas and Propagationen
dc.identifier.startpage1790en
dc.identifier.urihttps://hdl.handle.net/10468/7881
dc.identifier.volume67en
dc.language.isoenen
dc.publisherIEEEen
dc.relation.projectinfo:eu-repo/grantAgreement/RCUK/EPSRC/EP/L026074/1/GB/GigaMobile: Gigabit Mobile Networking using Incentivised Operator Controlled Device-to-Device Communications/en
dc.relation.urihttp://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8576610&isnumber=8660595
dc.rights© Doone et al. This work is licensed under a Creative Commons Attribution 3.0 Licenseen
dc.rights.urihttps://creativecommons.org/licenses/by/3.0/en
dc.subjectFading channelsen
dc.subjectκ-μ distributionen
dc.subjectWearable communicationsen
dc.subjectChannel measurementsen
dc.subjectPath loss (PL)en
dc.subjectκ-μ extreme distributionen
dc.subjectTwo-ray ground-reflectionen
dc.subjectVehicular communicationsen
dc.titlePedestrian-to-vehicle communications in an urban environment: channel measurements and modelingen
dc.typeArticle (peer-reviewed)en
Files
Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
08576610.pdf
Size:
3.51 MB
Format:
Adobe Portable Document Format
Description:
Published Version
License bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
2.71 KB
Format:
Item-specific license agreed upon to submission
Description: