Experimental testing on the influence of shaft rotary lip seal misalignment for a marine hydro-kinetic turbine

dc.check.date2022-12-20
dc.check.infoAccess to this article is restricted until 12 months after publication by request of the publisher.en
dc.contributor.authorHand, Brian P.
dc.contributor.authorErdogan, Nuh
dc.contributor.authorMurray, Dónal
dc.contributor.authorCronin, Patrick
dc.contributor.authorDoran, John
dc.contributor.authorMurphy, Jimmy
dc.contributor.funderHorizon 2020en
dc.date.accessioned2022-03-02T12:12:25Z
dc.date.available2022-03-02T12:12:25Z
dc.date.issued2021-12-20
dc.date.updated2022-03-02T12:05:02Z
dc.description.abstractTidal energy has received considerable attention over the past decade due to its predictability and high power density. The research in the tidal turbine area has concentrated primarily on the improvement of the energy conversion efficiency. In contrast, the testing of the tidal turbine’s mechanical components has received less attention. In particular, the reliable operation of rotary seals is crucial to prevent water ingress into mechanical and electrical components. This paper outlines an experimental test campaign to investigate the effect of shaft misalignment. Both instantaneous temperature and pressure measurements were recorded from two rotary seals. It was shown the temperature inside the aligned seal increased until the seal chamber pressure became equal with the inlet water pressure. The wear on the lip seal rings was examined and the difference found to be between 3.28% and 19.61%. Inspection of the seal liners, showed the presence of strong wiping effects for the misaligned seal with maximum track width differences of between 52.94% and 97.60% being noted. The misaligned seal liner experienced wider wear tracks but were not as deep as the aligned seal with differences of between 37.55% and 103.13% being recorded.en
dc.description.statusPeer revieweden
dc.description.versionAccepted Versionen
dc.format.mimetypeapplication/pdfen
dc.identifier.articleid101874en
dc.identifier.citationHand, B. P., Erdogan, N., Murray, D., Cronin, P., Doran, J. and Murphy, J. (2022) 'Experimental testing on the influence of shaft rotary lip seal misalignment for a marine hydro-kinetic turbine', Sustainable Energy Technologies And Assessments, 50, 101874 (9 pp). doi: 10.1016/j.seta.2021.101874en
dc.identifier.doi10.1016/j.seta.2021.101874en
dc.identifier.endpage9en
dc.identifier.issn2213-1388
dc.identifier.journaltitleSustainable Energy Technologies And Assessmentsen
dc.identifier.startpage1en
dc.identifier.urihttps://hdl.handle.net/10468/12685
dc.identifier.volume50en
dc.language.isoenen
dc.publisherElsevieren
dc.relation.projectinfo:eu-repo/grantAgreement/EC/H2020::RIA/727465/EU/Technology Advancement of Ocean energy devices through Innovative Development of Electrical systems to increase performance and reliability/TAOIDEen
dc.relation.urihttps://www.sciencedirect.com/science/article/pii/S2213138821008882
dc.rights© 2021 Elsevier Ltd. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/en
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/4.0/en
dc.subjectHydro-kinetic turbineen
dc.subjectLip sealen
dc.subjectTestingen
dc.subjectTidal energyen
dc.titleExperimental testing on the influence of shaft rotary lip seal misalignment for a marine hydro-kinetic turbineen
dc.typeArticle (peer-reviewed)en
Files
Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
Paper_AV.pdf
Size:
2.9 MB
Format:
Adobe Portable Document Format
Description:
Accepted version
License bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
2.71 KB
Format:
Item-specific license agreed upon to submission
Description: